Dear forum readers,
i am new here and i hope i not breaking one of the rules.
i have a problem with a game called call of duty ghost.
the iso thru abgx is good no errors or whatever
after burning i played a littlebit and then he hangs everytime on same spot ingame.
i burned anotherone same problem
then i look further searching forums and change the settings of imageburn.
in the meanwhile i did the checks with the hdd end the rest...still same problem.
so i gonna check after burning thru abgx and it goes to hang on 49% wit the error
'unrecoverable read error while checking the game crc Stealth was verified but game data wasn't'
when i typing this post he is running KProbe on 4x speed for best result to check.
after that i will get the log of abgx bevore burning and after and put these in the post.
Settings imgburn(dont have the log)
Specify 2133520 as the layerbreak in imgburn
OPC = Enabled
Burffer Size = 512MB
imgburn's priority to HIGH (do this from imgburn settings, Write -> Process Priority -> High).
SPTI to ElbyCDIO (Options > I/O)
My rigg settings(nothing special)
i have a ihas 124B
windows 7 x64
intel q9550 2.83GHz
and Ritek Disc(i think that is the problem)
Uitcome of KProbe
Date : 7-11-2013 1:05:07
Model : 0-0-2-0 H:ATAPI iHAS124 B AL0S
Disc : DVD+R DL , RITEKS04B [RiTEK Corporation]
Speed : 4x
ECC blocks sum (PI/PIF) : 8/1
Scanned range : 0 - 4267008
Sampling count : 250751
Errors : 0
PI Max : 161
PI Average : 23,36
PI Total : 732194
PIF Max : 5
PIF Average : 0,23
PIF Total : 7363
abgx of iso
if you want more data/things to solve the problem please ask because i am pretty tired of this problem and did a lot of things.
burned 6 disks wit 4 hanging ingame and 2 disk where lost in the burning proces wit error
Device: [2:0:0] ATAPI iHas124 b alos (d:) (ata)
Interpratation: Check Condition
CDB: 2A 00 00 20 D4 B0 00 00 20 00
Interpretation: Write (10) - Sectors: 2151600 - 2151631
Sense Area: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 00 00
Interpretation: Write Error
i have burn with the settings of this tutorial
the last one will i do again and post then my imgburn log
I 11:33:40 ImgBurn Version 184.108.40.206 started!
I 11:33:40 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 11:33:40 Total Physical Memory: 4.193.368 KiB - Available: 2.082.292 KiB
W 11:33:40 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
I 11:33:40 Initialising ElbyCDIO...
I 11:33:40 ELBYCDIO.DLL - Elaborate Bytes CDRTools - ElbyCDIO DLL - Version 220.127.116.11
I 11:33:40 Searching for SCSI / ATAPI devices...
I 11:33:40 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22NP20 1.04 (I:) (ATA)
I 11:33:40 -> Drive 2 - Info: ATAPI iHAS124 B AL0S (H:) (ATAPI)
I 11:33:40 Found 2 DVD±RW/RAMs!
W 11:36:26 I/O Interface has been changed!
I 11:36:26 Shutting down ElbyCDIO...
I 11:36:26 Initialising SPTI...
I 11:36:26 Searching for SCSI / ATAPI devices...
I 11:36:26 -> Drive 1 - Info: ATAPI iHAS124 B AL0S (H:) (ATAPI)
I 11:36:28 -> Drive 2 - Info: HL-DT-ST DVD-RAM GH22NP20 1.04 (I:) (ATA)
I 11:36:28 Found 2 DVD±RW/RAMs!
W 11:41:31 I/O Interface has been changed!
I 11:41:31 Shutting down SPTI...
I 11:41:31 Initialising ElbyCDIO...
I 11:41:31 ELBYCDIO.DLL - Elaborate Bytes CDRTools - ElbyCDIO DLL - Version 18.104.22.168
I 11:41:31 Searching for SCSI / ATAPI devices...
I 11:41:31 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH22NP20 1.04 (I:) (ATA)
I 11:41:31 -> Drive 2 - Info: ATAPI iHAS124 B AL0S (H:) (ATAPI)
I 11:41:31 Found 2 DVD±RW/RAMs!
I 11:51:38 Operation Started!
I 11:51:38 Source File: D:\Download\Call Of Duty Ghosts (2013) RF (Scene release)\DVD1\imars-codghosts-360a.dvd
I 11:51:38 Source File Sectors: 4.267.015 (MODE1/2048)
I 11:51:38 Source File Size: 8.738.846.720 bytes
I 11:51:38 Source File Volume Identifier: DVD_ROM
I 11:51:38 Source File Volume Set Identifier: 83d04000MS UDFBridge
I 11:51:38 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 11:51:38 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 11:51:38 Source File File System(s): ISO9660; UDF (1.50)
I 11:51:38 Destination Device: [0:2:0] ATAPI iHAS124 B AL0S (H:) (ATAPI)
I 11:51:38 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66)
I 11:51:38 Destination Media Supported Write Speeds: 4x; 6x; 8x
I 11:51:38 Destination Media Sectors: 4.267.040
I 11:51:38 Destination Media L0 Data Zone Capacity: 2.133.520 (Changeable: Yes)
I 11:51:38 Write Mode: DVD
I 11:51:38 Write Type: DAO
I 11:51:38 Write Speed: 2,4x
I 11:51:38 DVD+R DL Reserve Track: No
I 11:51:38 Link Size: Auto
I 11:51:38 Lock Volume: Yes
I 11:51:38 Test Mode: No
I 11:51:38 OPC: No
I 11:51:38 BURN-Proof: Enabled
W 11:51:38 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x)
W 11:51:38 The drive only supports writing these discs at 4x; 6x; 8x.
I 11:51:38 Book Type Setting: DVD-ROM
I 11:51:38 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: No
I 11:51:38 CD/DVD Life Record Count: 39 - CD/DVD Record Count: 7
I 11:51:38 User Specified L0 Data Zone Capacity: 2.133.520
W 11:51:38 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List
I 11:51:38 L0 Data Zone Capacity - Effective: 2.133.520
I 11:51:40 Filling Buffer... (76 MiB)
I 11:51:41 Writing LeadIn...
I 11:52:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 11:52:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 11:52:50 Writing Layer 0... (LBA: 0 - 2133519)
I 12:06:05 Writing Layer 1... (LBA: 2133520 - 4267014)
I 12:19:30 Synchronising Cache...
I 12:19:36 Closing Track...
I 12:19:37 Finalising Disc...
I 12:20:11 Exporting Graph Data...
I 12:20:11 Graph Data File: C:\Users\Administrator\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS124_B_AL0S_DONDERDAG-7-NOVEMBER-2013_11-51_RITEK-S04-66_2,4x.ibg
I 12:20:11 Export Successfully Completed!
I 12:20:11 Operation Successfully Completed! - Duration: 00:28:32
I 12:20:11 Average Write Rate: 5.337 KiB/s (3.9x) - Maximum Write Rate: 5.504 KiB/s (4.1x)
abgx check is the same as the check of the burned iso but KProbe is diferent
i think better than the other but have same problem hanging on same spot and will not install on hdd